Archive for the ‘2016’ Category

To the Lighthouse

Sunday, November 27th, 2016

img_8425

6.25 x 4.75 inches, hand embroidery on hand-painted silk.  This lighthouse is on a small island off the coast of British Columbia and the very faint purple mountains in the distance are the mainland.

The white part of the lighthouse is a scrap of Tyvek.  I have trouble capturing the shimmer of the threads on camera but may try again once it’s in the frame.  And here it is:

img_8449

More scenes coming at my usual slow pace!

Positively Petite Annual Miniature Exhibition

Tuesday, October 25th, 2016

pos-petite-evite-2016

Excited to take part in this upcoming exhibition!  Here’s a map of the location.  It’s only a short walk from the new Opus Art Supplies in the area, which is now open (click here for Opus map)

Waypoint

Friday, October 21st, 2016

Waypoint

3 x 4 inches, hand embroidery on hand-painted silk.  A mini-lighthouse enjoying its day off by the waters off British Columbia.

The background is built up slowly from scratch.  The faint purple at the horizon is actually mountains in the distance.  For the lighthouse I used a tiny strip of a Tyvek envelope, because white thread often reads as gray.

waypoint-back

Even the simplest pictures have their secrets.  On this photo of the back, the colors look different because I don’t have white paper behind the silk. When I stitched the lighthouse cap and so on, I had to first secure my thread at the side, then secretly walk the thread behind the rocky part, make my lighthouse stitches, and “step in my own footprints” to take the thread back to the side to secure it.  Otherwise, if I went as the crow flies, you would clearly see the dark thread behind the sky.  I’m also a believer in securing thread well because the whole picture has to withstand being stretched.

I’m still working on a larger and slightly different version of this picture, so I’m starting to feel as if I’ve been away at sea for a while!

 

 

 

 

 

 

 

Chasing the Sun

Sunday, July 17th, 2016

Chasing the Sun master - thumbnail

3 x 4 inches, hand embroidery on hand-painted silk.  Another British Columbia coastal scene.

The sky takes the longest.  I use an almost-dry brush to build up the colour gradually.  The mountains were much quicker.  All the water is hand-sewn using Sulky and other embroidery threads.

I forgot to underpaint the nearest island, which would have saved me having to be as careful to cover all the silk with thread.

Trees are always fun to do and very forgiving.  The more untidy your stitching, the more tree-like it looks.  In fact the worst idea is to try to make something that looks like a tree.

 

Stem education

Friday, June 17th, 2016

I’ve written about creating dandelion stems by painting on ribbon before, in this post.  But I just learned a new technique and thought I’d pass it on.

IMG_7546

I started with 1/4-inch-thick white ribbon.  Then I mixed some Pebeo silk paint to a nice green and painted it on.  The color is slightly different from one end of the stem to the other on purpose, for natural variation.

Then I loaded my little brush with some of the lightening medium (pictured below) and stroked it down the middle of the stem.  It “washes out” the green, making it scurry away to the edges, but then the green stays at the edges of the ribbon because it has nowhere else to go.   I did this while the green paint was still damp.  It makes the stem look 3D with very little effort from me.

IMG_7549

IMG_7547

I waited for it to dry then painted over the middle part with a yellow shade to warm it up a bit, while keeping the 3D look.  Then I took this splendidly blurry photograph!

IMG_7550

Then I took a couple of better ones, our model is the second from the top.

IMG_7551

And finally upright, as seen in nature.  Ribbons are useful for depicting all sorts of thick-stemmed flowers.   Before you plan your picture, make sure you can get hold of ribbon in the right width for the scale you want to work in.  If you’re only able to find a wider or narrower ribbon, that will decide the scale of the whole picture.

IMG_7552

Fair Winds

Tuesday, May 17th, 2016

Fair Seas

Almost 3 x 4 inches, hand embroidery on hand-painted silk, depicting somewhere off the coast of British Columbia.  The blue haze on the horizon is land in the distance.

Where would you rather be, the boat or the cottage?

*Detail alert*

The boat hull is hand-painted ribbon and the sails are Tyvek.  Full-size boat sails can be made with Tyvek, and I think it’s the first time I’ve used the same material as reality!  I shaded them with scraps of mesh from a fancy ribbon.  I also painted them but they only hold a little bit of colour.  I used acid-free glue and thread to hold the pieces down, depending on whether they were large enough to take a needle.

IMG_7358

This strange picture is of Tyvek.  It’s from a FedEx envelope.  (I don’t use the parts with the lettering on, haha).  The piece on the left is full-thickness.  If you split it at the edge with your fingernails and pull it apart, you get pieces like the ones on the right.  Looks a bit ghosty doesn’t it?  The thickness is very uneven, but then you can choose as thin a piece as you need.

And that’s a small piece of ribbon at the bottom, with the mesh part in the middle that I placed on my Tyvek to reduce the white glare.

Fair winds and following seas to you all!

 

 

Beyond the Bridge, the Sea

Monday, February 29th, 2016

Burrard Bridge cropped

5 x 2 inches, hand embroidery and hand-painted ribbons on hand-painted silk.  A view of the Burrard Bridge, Vancouver, BC.

I forgot to take photos in progress but here’s a photo showing the offstage shenanigans.

IMG_7003

I’ve taken the photo too early and I’ll probably add a few tiny stitches in post-production.

I painted a blue wash first, then hand-painted the mountains and treeline on top of that.  The groups of white dots are lights from houses in the distance and they’re done in shiny and glittery thread although the camera doesn’t pick that up.

I glued the ribbons to the background but they’re also held in place by some hopefully discreet stitches.  I coloured the ribbons (originally white) in two different ways: Fabric Fun Pastel Dye Sticks, or Pebeo Setasilk paint.  The dye sticks gave me more vibrant colours and I could keep going over with sticks in different shades until I was happy with the results.  After ironing to set the colour (through tracing paper, to keep my iron clean) they leave a more matte finish, making them a better choice for the concrete bridge supports.  The Setasilk lets the ribbon keep its full sheen and is a better choice for the boats.

The sparkly lights on the bridge and their reflections are done in Candlelight metallic yarn and the rest of the water in various shades of Sulky embroidery thread.  You may notice that the reflections get less vibrant as they approach the bottom of the picture, further from the light source. I sewed with Candlelight all the way to the bottom as usual, then “submerged” the foreground sparkles by sewing over them with blue Sulky thread.

The bridge is not anatomically accurate in every detail.  I’m no engineer.  But let’s call it artistic license!